Why Are My Earbuds Not Showing in Bluetooth? Causes and Fixes
If your earbuds are not showing in Bluetooth, the most common reason is that they are not in pairing mode, already connected to another device, out of battery or saved incorrectly on your phone.
This problem can happen with any wireless earbuds, including AirPods-style earbuds, gaming earbuds and budget TWS models. In most cases, you can fix it by resetting the earbuds, clearing old Bluetooth connections and reconnecting them properly.
At Delenzo Mart, you can find wireless earbuds, AirPods-style models and Bluetooth accessories for everyday listening, calls, gaming and travel.
Quick answer:
Charge the earbuds and case, turn Bluetooth off and on, restart your phone, forget old connections, then reset the earbuds and put them in pairing mode again.
Why are my earbuds not showing in Bluetooth?
Your earbuds may not appear in the Bluetooth list because of one or more of the following reasons:
| Cause | What it means | Fastest fix |
|---|---|---|
| Not in pairing mode | Earbuds are not discoverable | Hold the pairing button until the LED flashes |
| Low battery | Earbuds or case cannot power the Bluetooth radio | Charge for 15–30 minutes |
| Connected elsewhere | Earbuds auto-connected to another device | Turn off Bluetooth on the other device |
| Stuck phone Bluetooth | Phone Bluetooth is not refreshing | Turn Bluetooth off and on, restart the phone |
| Corrupted saved pairing | Old connection data is damaged | Forget the device and pair again |
| Too many saved devices | Phone has a long list of saved Bluetooth devices | Remove devices you no longer use |
| Out of range | Earbuds are too far from the phone | Keep them within a few feet |
| Needs reset | Pairing data in the earbuds is stuck | Factory reset the earbuds |
| Hardware or charging issue | Case or earbuds are faulty | Contact the seller or brand support |
Bluetooth devices discover each other through a service discovery process, so the earbuds must be discoverable and in the correct pairing state before they can appear in your phone’s Bluetooth list.
Quick fixes to try first

1. Charge the earbuds and case
Low battery is one of the most common reasons earbuds do not appear in Bluetooth.
- Put both earbuds inside the charging case.
- Close the lid and wait 30 seconds.
- Charge the case and earbuds for at least 15–30 minutes.
- Open the case near your phone and check if the LED light turns on.
- Try connecting again.
Apple also recommends placing AirPods in the charging case, closing the lid and waiting 30 seconds before troubleshooting connection issues. For more on this, read our guide to AirPods battery life and charging case.
2. Turn Bluetooth off and on
Sometimes the phone’s Bluetooth connection becomes stuck. Turning Bluetooth off and on refreshes the connection.
On Android:
- Open Settings.
- Go to Connected devices.
- Tap Connection preferences.
- Tap Bluetooth.
- Turn Bluetooth off, wait 10 seconds, then turn it on again.
Google’s Android Help recommends checking that devices are paired and connected, refreshing the accessory list and following the accessory’s pairing instructions.
On iPhone:
- Open Settings.
- Tap Bluetooth.
- Turn Bluetooth off.
- Wait 10 seconds.
- Turn Bluetooth on again.
3. Restart your phone
Restarting the phone can clear temporary Bluetooth errors. Samsung specifically recommends restarting both the phone and the Bluetooth device before trying to connect again.
- Restart your phone.
- Put the earbuds back in the case.
- Wait 10 seconds.
- Open the case again.
- Try pairing again.
Put earbuds in pairing mode

Earbuds do not always appear in Bluetooth immediately after opening the case. Many models require you to activate pairing mode manually.
Common pairing methods
- Open the charging case and keep it near your phone.
- Remove both earbuds from the case.
- Press and hold the function button on the case for 3–10 seconds.
- Wait for the LED light to flash white, blue or red.
- Open Bluetooth settings on your phone.
- Select the earbuds from the available devices list.
Samsung explains that some Galaxy Buds enter pairing mode by placing them in the charging case and holding the pairing button for more than three seconds. Other models may require holding both earbuds or their touchpads for several seconds.
Forget old Bluetooth connections
If your earbuds were connected to your phone before but are not connecting now, the saved Bluetooth profile may be corrupted. Removing the old connection often fixes the issue.
Forget earbuds on Android
- Open Settings.
- Tap Connected devices.
- Tap Connection preferences.
- Tap Bluetooth.
- Find your earbuds in the saved devices list.
- Tap the settings or gear icon.
- Select Forget or Unpair.
- Put the earbuds in pairing mode again.
- Select them from the available devices list.
Samsung’s troubleshooting guide also recommends unpairing the earbuds from the phone and pairing them again when they do not connect or stay connected.
Forget earbuds on iPhone
- Open Settings.
- Tap Bluetooth.
- Find your earbuds under My Devices.
- Tap the i icon.
- Tap Forget This Device.
- Confirm by tapping Forget Device.
- Put the earbuds in pairing mode again.
- Select them from the available devices list.
Apple says that selecting Forget This Device removes AirPods from all devices signed into the same Apple Account.
Looking for Reliable Wireless Earbuds?
Browse wireless earbuds and AirPods-style models for calls, music, gaming and travel.
Shop Wireless Earbuds →How to reset earbuds

If the earbuds still do not show in Bluetooth, reset them. Resetting removes old pairing information and allows the earbuds to connect like a new device.
General reset steps
- Place both earbuds in the charging case.
- Keep the case open.
- Press and hold the pairing or function button for 10–15 seconds.
- Wait until the LED light flashes red, white or blue.
- Release the button.
- Forget the earbuds from your phone’s Bluetooth settings.
- Restart Bluetooth on your phone.
- Open the case again and search for the earbuds.
Note:
Reset steps are different for every brand. Check the product manual, brand app or product page before resetting your earbuds.
Fix earbuds not connecting on Android
If your earbuds appear in Bluetooth but do not connect, try these steps:
- Open Settings > Connected devices > Connection preferences > Bluetooth.
- Tap the gear icon beside the earbuds.
- Select Forget or Unpair.
- Restart the phone.
- Put the earbuds in pairing mode.
- Select the earbuds from available devices.
- Allow any permission pop-ups if they appear.
- Test audio with a song, video or call.
Google’s Android Help also advises users to check pairing status, refresh the accessory list and follow the accessory-specific pairing instructions.
Fix earbuds not connecting on iPhone
If your earbuds appear in Bluetooth but do not connect on iPhone:
- Open Settings > Bluetooth.
- Tap the i icon beside the earbuds.
- Tap Forget This Device.
- Restart the iPhone.
- Put the earbuds in pairing mode.
- Select them from the available devices list.
- Test audio playback and calls.
Apple recommends checking that Bluetooth is on, unpairing the device if needed, and resetting AirPods if they still do not connect. Our step-by-step guide on how to connect AirPods Pro to iPhone, Android, laptop and smart TV may also help.
Why earbuds connect to another device
Many earbuds automatically reconnect to the last paired device. If your earbuds are connected to a laptop, tablet, old phone or another phone in the same room, they may not appear as available on your current phone.
Fix:
- Turn off Bluetooth on the other device.
- Disconnect or forget the earbuds from the other device.
- Put the earbuds back in the case.
- Open the case again near the phone you want to use.
- Activate pairing mode.
- Connect from the correct phone.
For more help with common connection issues, read Earbuds Not Connecting? Common Bluetooth Problems and Fixes or One Earbud Not Working? Here’s the Real Fix.
When to contact support
If the earbuds still do not appear in Bluetooth after charging, restarting, forgetting old devices and resetting, the issue may be hardware-related.
Check for these signs:
- The charging case does not light up.
- Only one earbud works.
- The earbuds do not turn on.
- The earbuds do not enter pairing mode.
- The earbuds were exposed to water or physical damage.
- The earbuds do not appear on any phone or laptop.
If your earbuds are under warranty, contact the seller or brand support before trying to open or repair them.
Wireless earbuds to consider
If your old earbuds keep failing, a fresh pair may be the simplest fix. Explore these options at Delenzo Mart:
- Samsung Galaxy Buds3: A good match for Samsung phones. See the Samsung Galaxy Buds3.
- AirPods-style earbuds: Compare the AirPods Pro 2 wireless earbuds or browse the full AirPods collection.
- Gaming earbuds: Low-latency options for mobile gamers, such as the M25 Wireless Gaming Earbuds.
- Everyday TWS earbuds: See the JOYROOM JR-T03S Pro or shop earbuds under 3000.
Need help choosing? Read our best Bluetooth earbuds under budget guide.
Final answer
If your earbuds are not showing in Bluetooth, start with the basics: charge the earbuds, turn Bluetooth off and on, restart your phone and forget old connections. If they still do not appear, reset the earbuds and put them into pairing mode again.
For new wireless earbuds or AirPods-style models, explore the earbuds collection at Delenzo Mart.
Ready for a New Pair of Earbuds?
Wireless earbuds and AirPods-style models, with delivery across Pakistan.
Explore Earbuds Collection →Frequently Asked Questions
Why are my earbuds not showing in Bluetooth?
Your earbuds may not show in Bluetooth because they are not in pairing mode, have low battery, are connected to another device, or your phone’s Bluetooth connection is stuck. Charge the earbuds, restart Bluetooth, forget old connections and try pairing again.
How do I fix earbuds that won’t connect to Bluetooth?
Charge the earbuds and case, turn Bluetooth off and on, restart your phone, forget old connections and reset the earbuds. Then put them in pairing mode and connect again.
Why can’t my phone find my earbuds?
Your phone may not find your earbuds because they are already connected to another device, not in pairing mode, out of range or low on battery. Put the earbuds in pairing mode and keep them close to the phone.
How do I reset earbuds for Bluetooth pairing?
Place both earbuds in the case, keep the case open and press and hold the pairing button for 10–15 seconds. Wait for the LED to flash, then forget the earbuds from your phone and pair them again. Exact steps vary by model.
How do I forget a Bluetooth device on Android?
Go to Settings > Connected devices > Connection preferences > Bluetooth, tap the gear icon beside the earbuds and select Forget or Unpair. Then pair the earbuds again.
How do I forget a Bluetooth device on iPhone?
Go to Settings > Bluetooth, tap the i icon beside the earbuds and select Forget This Device. Then put the earbuds in pairing mode and connect again.
Do earbuds need to be in pairing mode to show in Bluetooth?
Yes. If the earbuds are already connected to another device or are not in pairing mode, they may not appear in the available devices list. Open the case, activate pairing mode and search again.